Primo HDCAR82X18-TA

CAR HAULER Suspension: two 3500lbs Torsion Axles 2 Axle Brakes 2 Loading ramps Stone guard 30" Dovetail Stainless Steel Hardware G.V.W.R: 6990LBS Coupler Rating: 2 5/8″ 10,000lbs 4 wheel electric brakes Net Payload: 5640 lbs. Stainless Safety Chains: 24″ 30” Dove tail

Primo Car Hauler 6’9″ X 18′ Primo car haulers are specifically designed with the customer in mind. The main frame is made with 2×5 inch tube with a thickness of ¼”, this makes Primo car hauler frame the strongest on the market rated at 6990lbs. Primo Trailers not only run our main framing from front to back, but they have added 4 more 1×2 inch beams that span the whole length of the trailer. Primo used 4-6 more 1×2 beams from side to side. Then Primo goes even further and adds two more 2×4 inch tubes down each side of the trailer. All wiring is run completely enclosed with no wire exposed. Primo uses ultra-bright LED lights to ensure everyone on the road can see your trailer at night. Primo uses 6005-A aluminum on this trailer. 6005-A is a great aluminum, it has the strength of 6061 but the flexibility of 6063. Almost every US based aluminum trailer manufacturer uses 6061, this is a strong aluminum but is not flexible at all so when it fails it shatters. 6005-A offers the perfect balance between strength and flexibility. You might be wondering why all these companies use 6061. The answer is simple, availability and cost. 6005-A is an aluminum that is not only hard to source in the US but is also almost 30% more expensive. Fortunately, Primo has partners to provide us a steady stream of this premium aluminum. Primo Trailer Manufacturing strives to provide the best aluminum trailers in North America. Primo uses a 1.5mm thick custom extrusion for our flooring. This mold has 4 ribs giving each 8’ long piece a 2500lb payload capacity. Primo has even driven Kubota and Yanmar excavators over these pieces with no problems occurring.